Most individuals assume bench pressing is easy—simply lie down, seize the bar, and begin pushing, proper?
Unsuitable.
Correct bench press kind is extra intricate than it appears, and even minor errors in your setup and execution can restrict your progress or, worse, trigger harm.
On this professional information, you’ll learn to bench press with good approach.
You’ll additionally uncover heat up for the bench press, perceive the intricacies of bench press grip, learn to immediately enhance your bench press efficiency, and extra.
Easy methods to Carry out Correct Bench Press Type
To learn to bench press, cut up the train into three elements: arrange, descend, and press.
1. Set Up
Place a barbell within the hooks of a bench press station, then lie on the bench so your eyes are instantly below the bar.
Place your toes on the ground about shoulder-width aside and instantly below your knees.
Arch your again by pushing your chest towards the bar (whereas protecting your shoulders and butt on the bench), then pull your shoulder blades collectively and towards your butt (think about you’re “placing your shoulder blades into your again pockets”) like this:
Bench Press Grip
Many individuals overlook the finer particulars of a correct bench press grip, but it’s a vital a part of your setup. Let’s break down crucial elements that can assist you grip the bar accurately:
- Bench Press Grip Width: Many weightlifters tinker with their grip width on the bench press, considering it’ll subtly change which muscle tissue you prepare. In actuality, it makes little distinction. The most effective method is a medium grip, round 18-to-24 inches huge, because it’s usually essentially the most snug and steady for lifting heavy weights safely.
- Bench Press Wrist Place: Wrist place for the bench press issues greater than most understand—get it flawed, and also you’ll “leak” pressure that needs to be serving to carry the bar. To keep away from this, bend your wrists again barely, letting the bar relaxation within the base of your palms with out permitting them to fold again at sharp angles.
- Easy methods to Grip the Bar: Wrap your fingers and thumbs across the bar and squeeze it as tightly as you may. This grip prevents the bar from slipping out of your fingers and in addition boosts efficiency.
2. Descend
Decrease the bar till it touches your chest in keeping with your nipples, protecting your elbows about 6-to-10 inches out of your ribs.
3. Press
Push the bar up and return to the beginning place, protecting your shoulder blades and elbows tucked.
Whenever you’re on the final rep of a set of the flat barbell bench press, end it absolutely (arms straight), after which slam the bar again into the upright steel bars, and decrease it onto the hooks. Don’t attempt to press the bar instantly again into the hooks as a result of for those who miss, it will possibly fall in your face.
Right here’s the way it ought to look if you put all of it collectively:
Easy methods to Heat Up for the Bench Press
Working by a correct bench press heat up is significant for acting at your greatest. In accordance to research, warming up with heavy weights is the easiest way to prime your physique in your “onerous” bench press units.
Right here’s the protocol I like to recommend:
- Roughly estimate what weight you’re going to make use of for the bench press in your first set (that is your “onerous set” weight).
- Do 6 reps with about 50% of your onerous set weight and relaxation for a minute.
- Do 4 reps with about 70% of your onerous set weight and relaxation for a minute.
Then, start your onerous units.
Easy methods to Enhance Your Bench Press: 5 Fast Ideas
Use the next 5 tricks to immediately enhance your bench press efficiency:
1. Use the Proper Cues
The most effective cues for enhancing bench press efficiency are:
- “Contact your chest to the ceiling”: Making an attempt to the touch the ceiling along with your chest retains your shoulders again and down and backbone arched and ensures your pecs do a lot of the work.
- “Screw your toes into the ground”: Imagining screwing your toes into the ground creates pressure in your legs which increases stability, rigidity, and steadiness.
- “Rip the bar aside”: Enthusiastic about ripping the barbell aside ensures your upper back stays engaged, offering a steady base to press off.
2. Use Leg Drive
Utilizing your legs to “drive” your physique up the bench as you press the load benefits your efficiency in two methods:
- It will increase lower-body stability
- It facilitates a extra environment friendly bar path
Simply bear in mind, the purpose is to not push your hips as much as the ceiling, however to slip your physique towards the highest of the bench. Right here’s a diagram that can assist you visualize this:
To be taught extra about maximize bench press leg drive, try this text:
How to Use Leg Drive in the Bench Press to Build More Muscle
3. Squeeze the Bar
For a simple energy increase, grip the barbell as onerous as you may, clench your jaw muscle tissue, and push your tongue into the roof of your mouth. Several studies present that doing so boosts your energy and energy manufacturing.
To be taught extra about this phenomenon, try this text:
How to Use Remote Voluntary Contraction to Instantly Get Stronger
4. Use a Spotter
Having a spotter on the bench can increase the variety of reps you may carry out and make you’re feeling extra assured in your skill to finish every set efficiently, which ought to support efficiency over the long run.
5. Repair Your Bar Path
Research reveals that many novices battle with an inefficient bench press bar path, typically urgent the bar straight up and down.
This forces the entrance delts to work tougher to stabilize the load and limits how a lot weight you carry.
To press extra effectively:
- Begin every rep with the bar instantly over your shoulders.
- Decrease the bar in a slight arc to your decrease chest.
- Press the bar up and towards your throat.
- End with the bar instantly over your shoulders.
Right here’s the way it ought to look:
Advantages of the Bench Press
Higher Physique Hypertrophy
The bench press primarily trains the pecs, shoulders and triceps, but it surely additionally engages virtually each muscle group above the waist, which makes it extraordinarily efficient for gaining all-around higher physique mass.
Power Achieve
The flat barbell bench press is exceptionally steady, so it lets you carry maximally heavy weights safely.
It additionally lets you increase the load you carry in small increments, so you may make regular, manageable progress with out hitting plateaus or risking harm.
Enhanced Athletic Efficiency
Research reveals that the bench press boosts higher physique pushing energy, making it preferrred for athletes who must throw, punch, jostle, or rapidly rise up off the bottom of their sport.
Muscle tissues Labored within the Bench Press
The principle muscle tissue labored within the bench press are:
- Pectorals
- Deltoids
- Triceps
Right here’s how these muscle tissue look in your physique:
That mentioned, the bench press engages many different muscle tissue to a lesser diploma. To seek out out which of them, try this text:
What Muscles Does Bench Press Work? An Evidence-Based Guide
The Greatest Bench Press Variations
1. Shut-Grip Barbell Bench Press
Whenever you slender your grip on the bar and maintain your elbows near your ribs, you place extra of the load on the triceps and barely much less in your chest.
The close-grip bench press is only a common bench press carried out along with your fingers just a few inches inside shoulder-width aside, or about 2-to-3 inches nearer than your regular grip. Aside from the grip modification, you must carry out the close-grip bench in precisely the identical means because the bench press.
2. Dumbbell Bench Press
The dumbbell bench press is much like the barbell bench press, besides you press one dumbbell in every hand as a substitute of a barbell.
The 2 predominant advantages of the dumbbell bench press are that it lets you improve the range of motion past the usual barbell bench press and to make use of no matter wrist place feels extra snug to you.
3. Incline Barbell Bench Press
The incline bench press works precisely the identical means because the barbell bench press, besides you lie on an incline bench as a substitute of a flat bench.
When doing the incline bench press, the angle of incline within the bench needs to be 30-to-45 levels. The essential setup and motion of the incline bench press is simply as you discovered for the common bench press, with a small exception: the bar ought to cross by the chin and contact slightly below the collarbones to permit for a vertical bar path.
4. Reverse-Grip Barbell Bench Press
The reverse-grip bench press is much like the close-grip and incline bench press, in that it emphasizes the higher portion of your chest muscle.
To do the reverse-grip bench press, flip your grip round on the bar (so your palms face you). Grip the bar in order that it crosses your palm diagonally, from the bottom of your index finger to the other fringe of your wrist.
5. Decline Bench Press
The decline barbell bench press is in style amongst some folks however I’m not a fan. Because of its diminished vary of movement, it’s simply less effective than incline and flat urgent.
A standard argument made for doing decline presses is working the bottom portion of the pectoralis main, however there isn’t a lot proof that it’s worthwhile to particularly prepare the “decrease” portion of the pecs (that are already educated in the course of the flat barbell bench press).
FAQ #1: Incline bench vs. Flat bench: What’s the distinction?
The principle distinction between the incline and flat barbell bench press is that the incline model emphasizes your “upper chest,” whereas the flat bench trains the mid and decrease pecs extra.
Since these workout routines complement one another, it’s a good suggestion to incorporate each in your routine to develop a fuller, extra balanced chest.
FAQ #2: Is the chest press the identical because the bench press?
Not precisely. Each workout routines prepare the identical main muscle tissue—the pecs, front delts, and triceps—so the chest press is a viable various to the bench press.
That mentioned, analysis additionally reveals that free-weight barbell presses interact extra stabilizer muscle tissue than machine-based presses, which possible implies that the flat barbell bench press is healthier for gaining all-around muscle than the chest press.
For instance, a study revealed in The Journal of Power and Conditioning discovered that the free-weight bench press was superior to the Smith machine bench press for coaching the facet delts:
Thus, if you wish to maximize general muscle development and construct purposeful energy, the flat barbell bench press is your best choice. And for those who’re on the lookout for a secure, easy train for gaining pec, shoulder, and triceps dimension, the chest press is very efficient.
FAQ #3: Why is my bench not enhancing?
In case your bench press isn’t enhancing, the probably wrongdoer is poor kind. A great way to burnish your approach is to spend further time throughout your bench press warm-up grooving in correct kind.
In case your kind is strong, the following probably cause that your bench has stalled is that you just aren’t benching sufficient.
Strive rising your bench frequency to 2 or 3 occasions every week, and ensure it’s the primary train you do on bench days.
And if this doesn’t get you unstuck, try this text for extra recommendation on enhance your bench press:
Increase Your Bench Press Max With 16 Science-Backed Techniques
FAQ #4: How a lot does a bench press bar weigh?
An ordinary bench press bar is an Olympic barbell, which weighs 45 kilos (20 kilograms).
For extra details about the weights of various barbells, try this text:
How Much Does a Barbell Weigh? A Comprehensive Guide
FAQ #5: Why do my arms damage from bench press?
In case your triceps really feel sore after bench pressing, it’s possible simply delayed onset muscle soreness (DOMS), which is a standard a part of energy coaching.
Nonetheless, for those who really feel sharp ache in your biceps or elbows, there could also be a problem along with your kind.
Benching with an excessively huge grip can strain your biceps tendons, so narrowing your grip can ease biceps ache in some situations.
Moreover, flaring your elbows too far out of your physique can improve strain on the long head of the biceps, particularly in the course of the decreasing section of the carry. To keep away from this, tuck your elbows nearer to your sides—6-to-10 inches out of your ribs works properly for many.
If elbow ache is the difficulty, try this text for steering on repair it:
Have Elbow Pain? This Is Your 4-Step Guide to Fixing It
FAQ #6: How do you bench with one arm longer than the opposite?
Many individuals really feel like considered one of their arms is longer than the opposite in the course of the bench press as a result of one arm takes longer to “lock out” (absolutely straighten).
Nonetheless, it’s normally not a problem of arm size—it’s extra possible as a consequence of a strength imbalance. When one facet of your physique is weaker, it struggles extra to complete every rep.
To right this widespread difficulty, ensure you embrace unilateral exercises (workout routines that prepare either side of your physique independently) just like the dumbbell bench press in your routine. This helps even out energy variations since your robust facet can’t make up in your weaker facet.
Additionally, take note of your setup. In case your shoulders or grip is asymmetrical, it will possibly create the phantasm of 1 arm being longer whereas benching.
Scientific References +
- Saeterbakken, Atle Hole, et al. “The Effect of Grip Width on Muscle Strength and Electromyographic Activity in Bench Press among Novice- and Resistance-Trained Men.” International Journal of Environmental Research and Public Health, vol. 18, no. 12, 14 June 2021, p. 6444, https://doi.org/10.3390/ijerph18126444. Accessed 2 Sept. 2021.
- Mausehund, Lasse, et al. “Understanding Bench Press Biomechanics—the Necessity of Measuring Lateral Barbell Forces.” Journal of Strength and Conditioning Research, vol. Publish Ahead of Print, 4 Feb. 2021, https://doi.org/10.1519/jsc.0000000000003948.
- “Effect of Remote Voluntary Contractions on Isometric Prime Mover Torque and Electromyography.” ResearchGate, 2024, www.researchgate.net/publication/282724663_Effect_of_remote_voluntary_contractions_on_isometric_prime_mover_torque_and_electromyography. Accessed 1 Oct. 2024.
- Viveiros, Leonardo , et al. High-Load and Low-Volume Warm-up Increases Performance in a Resistance Training Session. 12 Aug. 2023, pp. p1487-1491, www.bodyworkmovementtherapies.com/article/S1360-8592(24)00401-7/abstract?ck_subscriber_id=1108414226, https://doi.org/10.1016/j.jbmt.2024.08.004.
- Ribeiro, Bruno, et al. “The Role of Specific Warm-up during Bench Press and Squat Exercises: A Novel Approach.” International Journal of Environmental Research and Public Health, vol. 17, no. 18, 22 Sept. 2020, p. 6882, https://doi.org/10.3390/ijerph17186882.
- Kristiansen, M., et al. “Inter-Subject Variability of Muscle Synergies during Bench Press in Power Lifters and Untrained Individuals.” Scandinavian Journal of Medicine & Science in Sports, vol. 25, no. 1, 24 Dec. 2013, pp. 89–97, https://doi.org/10.1111/sms.12167.
- Van Every, Derrick W., et al. “Biomechanical, Anthropometric and Psychological Determinants of Barbell Bench Press Strength.” Sports, vol. 10, no. 12, 5 Dec. 2022, p. 199, https://doi.org/10.3390/sports10120199.
- EBBEN, WILLIAM P., et al. “The Effect of Remote Voluntary Contractions on Knee Extensor Torque.” Medicine & Science in Sports & Exercise, vol. 40, no. 10, Oct. 2008, pp. 1805–1809, https://doi.org/10.1249/mss.0b013e31817dc4ad.
- Garceau, Luke R, et al. “Effect of Remote Voluntary Contractions on Upper Body Force and Muscle Activation in Women and Men.” Journal of Strength and Conditioning Research, vol. 24, Jan. 2010, p. 1, https://doi.org/10.1097/01.jsc.0000367113.51402.34.
- Sheridan, Andrew, et al. “Presence of Spotters Improves Bench Press Performance: A Deception Study.” Journal of Strength and Conditioning Research, vol. 33, no. 7, July 2019, pp. 1755–1761, research.edgehill.ac.uk/ws/portalfiles/portal/20211469/Sheridan+et+al+%28Accepted+Manuscript+JSCR-08-8664-R1%29.pdf, https://doi.org/10.1519/jsc.0000000000002285.
- Schoenfeld, Brad J. “The Mechanisms of Muscle Hypertrophy and Their Application to Resistance Training.” Journal of Strength and Conditioning Research, vol. 24, no. 10, Oct. 2010, pp. 2857–72.
- López-Laval, Isaac, et al. “Relationship between Bench Press Strength and Punch Performance in Male Professional Boxers.” Journal of Strength and Conditioning Research, Aug. 2019, p. 1, https://doi.org/10.1519/jsc.0000000000003362.
- “(PDF) Effects of Variations of the Bench Press Exercise on the EMG Activity of Five Shoulder Muscles.” ResearchGate, www.researchgate.net/publication/232217991_Effects_of_Variations_of_the_Bench_Press_Exercise_on_the_EMG_Activity_of_Five_Shoulder_Muscles. Accessed 28 May 2021.
- Trebs, Arthur A, et al. “An Electromyography Analysis of 3 Muscles Surrounding the Shoulder Joint during the Performance of a Chest Press Exercise at Several Angles.” Journal of Strength and Conditioning Research, vol. 24, no. 7, July 2010, pp. 1925–1930, insights.ovid.com/strength-conditioning-research/jscr/2010/07/000/electromyography-analysis-muscles-surrounding/31/00124278, https://doi.org/10.1519/jsc.0b013e3181ddfae7.
- Lauver, Jakob D., et al. “Influence of Bench Angle on Upper Extremity Muscular Activation during Bench Press Exercise.” European Journal of Sport Science, vol. 16, no. 3, 23 Mar. 2015, pp. 309–316, https://doi.org/10.1080/17461391.2015.1022605.
- “Effects of Variations of the Bench Press Exercise on The… : The Journal of Strength & Conditioning Research.” LWW, 2019, journals.lww.com/nsca-jscr/abstract/1995/11000/effects_of_variations_of_the_bench_press_exercise.3.aspx.
- HEIDEL, Kyle A., et al. “Machines and Free Weight Exercises: A Systematic Review and Meta-Analysis Comparing Changes in Muscle Size, Strength, and Power.” The Journal of Sports Medicine and Physical Fitness, Oct. 2021, https://doi.org/10.23736/s0022-4707.21.12929-9. Accessed 7 Nov. 2021.
- Fees, Martin, et al. “Upper Extremity Weight-Training Modifications for the Injured Athlete.” The American Journal of Sports Medicine, vol. 26, no. 5, Sept. 1998, pp. 732–742, https://doi.org/10.1177/03635465980260052301.
- Post, M., and P. Benca. “Primary Tendinitis of the Long Head of the Biceps.” Clinical Orthopaedics and Related Research, no. 246, 1 Sept. 1989, pp. 117–125, pubmed.ncbi.nlm.nih.gov/2766599/.
- Pratt, Neal E. “Anatomy and Biomechanics of the Shoulder.” Journal of Hand Therapy, vol. 7, no. 2, Apr. 1994, pp. 65–76, www.sciencedirect.com/science/article/pii/S0894113012800743, https://doi.org/10.1016/s0894-1130(12)80074-3.